Best of the Best
Page 8
From Peter Akamu in Hawaii.
 |
 |
| Crosman
2240 with a stainless steel breach, bored out valve, a removable Co2
bulk fill system that can be also used with 12 gram carts, finished off with a salvaged stock from a M-1 carbine. |
25
cal. 2560 that sports a Mac-1 heavy barrel and homemade breach. Diana 20 grain pellets do about 610-615 fps and packs a punch, other than a removable stock and bored out valve that's about it. |
| More from Peter | |
 |
 |
 |
 |
||
| Ronson Lepper's nice collection | ||
 |
| Don't
see a lot of Joben's guns. But here is a 2250 snub nose he built.
sweet |
 |
 |
| Robert's
Handsome 1322
"I received my 1322 from
Roy at Mountainair today and I'm extremely happy with it, powerful and accurate what more could you ask
for". |
|
 |
 |
 |
 |
 |
 |
| Sheldon's
Beautiful 2260 (AKA 2260KS)
Steve Corcoran premium walnut stock, Crosman steel breech, ss trigger and bolt, muzzle break by Art, king arms bipod, and all modds done by Eric Briggs |
||
| Adrian's Modded 2250 | |||
 |
 |
 |
 |
| Specs: 2250 base. 24 inch barrel, with recrown. Silencer adapter and Hushpower II Silencer. Crosman steel breech. AS2250 bolt handle. 'Grant' stainless steel bolt with extended probe. Spring and ball mod to the bolt so it stays where i put it. Trigger rebuild, washers, polishing, pen spring + spring guide, sear grind. Hammer spring adjuster and guide. Bulk CO2, 9oz tank, fill adapter, macroline and a couple of 1/8 npt 1/4 slip fit swivel elbows, hand made dummy adapter. Valve volume increased by cutting half the threads off the stem guide and drilling out, and cutting the piercing pin off. Tapered stem, exhaust port curved, and new breech seal with 4.25mm ID Scope. Hawke Airmax 4-12x44 Milidot |
|||
| Peter Ruut's Modified 160...Stunning | |||||
 |
 |
 |
 |
 |
 |
| A
lot of internal work such as enlarged passages and lightened oversize valve. Greater spring pressure has been added also. It has been bulked and finished off in a baked on stainless steel. I have added a custom barrel clamp of my own design and topped it off with stainless steel fittings and a Dave G stock. All in all, I think its not too shabby!!! |
|||||
| Calvin Lewis with his home made double barrel shotgun. | |
 |
|
 |
|
 |
 |
| SPECS:
Double Barrel MORE PICTURE COMING |
|
 |
 |
 |
 |
| Rick Pryor's pair of tricked out 1377's. | |||
| The 1322 is about 5 years old and has burled walnut grips from Rick Andres ,Crosman steel breech , trigger shoe, BSA 4x32AO scope and a PSP power tune. The 1377 is almost 20 tears old ,has less than 300 shots through it and is totally stock other than the grips which I painted with Krylon " Make it Stone" color Obsidian. I like the way the Krylon looks so much that I am in the process of doing my RWS 34's stock with it. | |||
 |
 |
 |
 |
 |
| Dan wanted a Gamo Shadow for Christmas but knew his wife would not let him spend any more money on airguns...for God's sake...the kids needed to eat!! So he thought and he thought until he came up with the idea of building her a 2260 painted light blue of her very own. It worked. | ||||
 |
 |
 |
 |
 |
| But wait...the story is not finished. With what was left over from modding the 2260...he built this nice little gun. His wife liked it so she took it too. Let's see...a wife who is a massage therapist AND is taking an interest in airguns...where can I get me one of them? | ||||
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24